Download Motion Simulation and Mechanism Design Using Solidworks Motion 2011 PDF

Motion Simulation and Mechanism Design Using Solidworks Motion 2011

Author :
Publisher : SDC Publications
Release Date :
ISBN 10 : 9781585036691
Pages : 132 pages
Rating : 4.6/5 (366 downloads)

Download Motion Simulation and Mechanism Design Using Solidworks Motion 2011 PDF Full Free by Kuang-Hua Chang and published by SDC Publications. This book was released on 2012 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motion Simulation and Mechanism Design with SolidWorks Motion 2011 is written to help you become familiar with SolidWorks Motion, an add-on module of the SolidWorks software family. This book covers the basic concepts and frequently used commands required to advance readers from a novice to intermediate level in using SolidWorks Motion. SolidWorks Motion allows you to use solid models created in SolidWorks to simulate and visualize mechanism motion and performance. Using SolidWorks Motion early in the product development stage could prevent costly redesign due to design defects found in the physical testing phase. Therefore, using SolidWorks Motion contributes to a more cost effective, reliable, and efficient product design process. Basic concepts discussed in this book include model generation, such as creating assembly mates for proper motion; carrying out simulation and animation; and visualizing simulation results, such as graphs and spreadsheet data. These concepts are introduced using simple, yet realistic examples. Verifying the results obtained from the computer simulation is extremely important. One of the unique features of this book is the incorporation of theoretical discussions for kinematic and dynamic analyses in conjunction with the simulation results obtained using SolidWorks Motion. Verifying the simulation results will increase your confidence in using the software and prevent you from being fooled by erroneous simulations.


Download Product Performance Evaluation using CAD/CAE PDF

Product Performance Evaluation using CAD/CAE

Author :
Publisher : Academic Press
Release Date :
ISBN 10 : 9780123984692
Pages : 564 pages
Rating : 4.4/5 (846 downloads)

Download Product Performance Evaluation using CAD/CAE PDF Full Free by Kuang-Hua Chang and published by Academic Press. This book was released on 2013-02-03 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is one book of a four-part series, which aims to integrate discussion of modern engineering design principles, advanced design tools, and industrial design practices throughout the design process. Through this series, the reader will: Understand basic design principles and modern engineering design paradigms. Understand CAD/CAE/CAM tools available for various design related tasks. Understand how to put an integrated system together to conduct product design using the paradigms and tools. Understand industrial practices in employing virtual engineering design and tools for product development. Provides a comprehensive and thorough coverage on essential elements for product performance evaluation using the virtual engineering paradigms Covers CAD/CAE in Structural Analysis using FEM, Motion Analysis of Mechanical Systems, Fatigue and Fracture Analysis Each chapter includes both analytical methods and computer-aided design methods, reflecting the use of modern computational tools in engineering design and practice A case study and tutorial example at the end of each chapter provide hands-on practice in implementing off-the-shelf computer design tools Provides two projects at the end of the book showing the use of Pro/ENGINEER® and SolidWorks ® to implement concepts discussed in the book


Download e-Design PDF

e-Design

Author :
Publisher : Academic Press
Release Date :
ISBN 10 : 9780128097366
Pages : 1226 pages
Rating : 4.7/5 (973 downloads)

Download e-Design PDF Full Free by Kuang-Hua Chang and published by Academic Press. This book was released on 2016-02-23 with total page 1226 pages. Available in PDF, EPUB and Kindle. Book excerpt: e-Design: Computer-Aided Engineering Design, Revised First Edition is the first book to integrate a discussion of computer design tools throughout the design process. Through the use of this book, the reader will understand basic design principles and all-digital design paradigms, the CAD/CAE/CAM tools available for various design related tasks, how to put an integrated system together to conduct All-Digital Design (ADD), industrial practices in employing ADD, and tools for product development. Comprehensive coverage of essential elements for understanding and practicing the e-Design paradigm in support of product design, including design method and process, and computer based tools and technology Part I: Product Design Modeling discusses virtual mockup of the product created in the CAD environment, including not only solid modeling and assembly theories, but also the critical design parameterization that converts the product solid model into parametric representation, enabling the search for better design alternatives Part II: Product Performance Evaluation focuses on applying CAE technologies and software tools to support evaluation of product performance, including structural analysis, fatigue and fracture, rigid body kinematics and dynamics, and failure probability prediction and reliability analysis Part III: Product Manufacturing and Cost Estimating introduces CAM technology to support manufacturing simulations and process planning, sheet forming simulation, RP technology and computer numerical control (CNC) machining for fast product prototyping, as well as manufacturing cost estimate that can be incorporated into product cost calculations Part IV: Design Theory and Methods discusses modern decision-making theory and the application of the theory to engineering design, introduces the mainstream design optimization methods for both single and multi-objectives problems through both batch and interactive design modes, and provides a brief discussion on sensitivity analysis, which is essential for designs using gradient-based approaches Tutorial lessons and case studies are offered for readers to gain hands-on experiences in practicing e-Design paradigm using two suites of engineering software: Pro/ENGINEER-based, including Pro/MECHANICA Structure, Pro/ENGINEER Mechanism Design, and Pro/MFG; and SolidWorks-based, including SolidWorks Simulation, SolidWorks Motion, and CAMWorks. Available on the companion website http://booksite.elsevier.com/9780123820389


Download Engineering Design with SolidWorks 2011 PDF

Engineering Design with SolidWorks 2011

Author :
Publisher : SDC Publications
Release Date :
ISBN 10 : 9781585036233
Pages : 780 pages
Rating : 4.6/5 (362 downloads)

Download Engineering Design with SolidWorks 2011 PDF Full Free by David C. Planchard and published by SDC Publications. This book was released on 2011 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Design with SolidWorks 2011 is written to assist students, designers, engineers and professionals. The book provides a solid foundation in SolidWorks by utilizing projects with step-by-step instructions for the beginning to intermediate SolidWorks user. Explore the user interface, CommandManager, menus, toolbars and modeling techniques to create parts, assemblies and drawings in an engineering environment. Follow the step-by-step instructions and develop multiple parts and assemblies that combine machined, plastic and sheet metal components. Formulate the skills to create, modify and edit sketches and solid features. Learn the techniques to reuse features, parts and assemblies through symmetry, patterns, copied components, design tables, Bills of Materials, Custom Properties and Configurations. Address various SolidWorks analysis tools: SimulationXpress, Sustainability / SustainabilityXpress and DFMXpress and Intelligent Modeling techniques. Learn by doing, not just by reading! Desired outcomes and usage competencies are listed for each project. Know your objective up front. Follow the steps in Project 1 - 8 to achieve the design goals. Work between multiple documents, features, commands and custom properties that represent how engineers and designers utilize SolidWorks in industry. Review individual features, commands and tools with the enclosed Multi-media CD. The projects contain exercises. The exercises analyze and examine usage competencies. Collaborate with leading industry suppliers such as SMC Corporation of America, Boston Gear and 80/20 Inc. Collaborative information translates into numerous formats such as paper drawings, electronic files, rendered images and animations. On-line intelligent catalogs guide designers to the product that meets both their geometric requirements and performance functionality. The authors developed the industry scenarios by combining their own industry experience with the knowledge of engineers, department managers, vendors and manufacturers. These professionals are directly involved with SolidWorks everyday. Their responsibilities go far beyond the creation of just a 3D model. The book is designed to compliment the SolidWorks Tutorials contained in SolidWorks 2011.


Download Product Manufacturing and Cost Estimating using CAD/CAE PDF

Product Manufacturing and Cost Estimating using CAD/CAE

Author :
Publisher : Academic Press
Release Date :
ISBN 10 : 9780124046009
Pages : 570 pages
Rating : 4.6/5 (46 downloads)

Download Product Manufacturing and Cost Estimating using CAD/CAE PDF Full Free by Kuang-Hua Chang and published by Academic Press. This book was released on 2013-07-01 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second part of a four part series that covers discussion of computer design tools throughout the design process. Through this book, the reader will... ...understand basic design principles and all digital design paradigms. ...understand CAD/CAE/CAM tools available for various design related tasks. ...understand how to put an integrated system together to conduct All Digital Design (ADD). ...understand industrial practices in employing ADD and tools for product development. Provides a comprehensive and thorough coverage of essential elements for product manufacturing and cost estimating using the computer aided engineering paradigm Covers CAD/CAE in virtual manufacturing, tool path generation, rapid prototyping, and cost estimating; each chapter includes both analytical methods and computer-aided design methods, reflecting the use of modern computational tools in engineering design and practice A case study and tutorial example at the end of each chapter provides hands-on practice in implementing off-the-shelf computer design tools Provides two projects at the end of the book showing the use of Pro/ENGINEER® and SolidWorks® to implement concepts discussed in the book


Download Advanced Technologies in Manufacturing, Engineering and Materials PDF

Advanced Technologies in Manufacturing, Engineering and Materials

Author :
Publisher : Trans Tech Publications Ltd
Release Date :
ISBN 10 : 9783038261810
Pages : 2150 pages
Rating : 4.1/5 (618 downloads)

Download Advanced Technologies in Manufacturing, Engineering and Materials PDF Full Free by Yun Hae Kim and published by Trans Tech Publications Ltd. This book was released on 2013-09-04 with total page 2150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2013 International Forum on Mechanical and Material Engineering (IFMME 2013), June 13-14, Guangzhou, China


Download New Trends in Mechanism and Machine Science PDF

New Trends in Mechanism and Machine Science

Author :
Publisher : Springer Nature
Release Date :
ISBN 10 : 9783030550615
Pages : 539 pages
Rating : 4.0/5 (56 downloads)

Download New Trends in Mechanism and Machine Science PDF Full Free by Doina Pisla and published by Springer Nature. This book was released on 2020-08-20 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the latest research and industrial applications in the areas of mechanism science, robotics and dynamics. The respective contributions cover such topics as computational kinematics, control issues in mechanical systems, mechanisms for medical rehabilitation, mechanisms for minimally invasive techniques, cable robots, design issues for mechanisms and robots, and the teaching and history of mechanisms. Written by leading researchers and engineers, and selected by means of a rigorous international peer-review process, the papers highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations. They reflect the outcomes of the 8th European Conference on Mechanism Science (EuCoMeS) in 2020.


Download Wearable Sensors and Robots PDF

Wearable Sensors and Robots

Author :
Publisher : Springer
Release Date :
ISBN 10 : 9789811024047
Pages : 587 pages
Rating : 4.4/5 (24 downloads)

Download Wearable Sensors and Robots PDF Full Free by Canjun Yang and published by Springer. This book was released on 2016-09-30 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings present the latest information on regulations and standards for medical and non-medical devices, including wearable robots for gait training and support, design of exoskeletons for the elderly, innovations in assistive robotics, and analysis of human–machine interactions taking into account ergonomic considerations. The rapid development of key mechatronics technologies in recent years has shown that human living standards have significantly improved, and the International Conference on Wearable Sensor and Robot was held in Hangzhou, China from October 16 to 18, 2015, to present research mainly focused on personal-care robots and medical devices. The aim of the conference was to bring together academics, researchers, engineers and students from across the world to discuss state-of-the-art technologies related to various aspects of wearable sensors and robots. div


Download Computer Aided Design and Manufacturing PDF

Computer Aided Design and Manufacturing

Author :
Publisher : John Wiley & Sons
Release Date :
ISBN 10 : 9781119534235
Pages : 640 pages
Rating : 4.4/5 (342 downloads)

Download Computer Aided Design and Manufacturing PDF Full Free by Zhuming Bi and published by John Wiley & Sons. This book was released on 2020-02-05 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Broad coverage of digital product creation, from design to manufacture and process optimization This book addresses the need to provide up-to-date coverage of current CAD/CAM usage and implementation. It covers, in one source, the entire design-to-manufacture process, reflecting the industry trend to further integrate CAD and CAM into a single, unified process. It also updates the computer aided design theory and methods in modern manufacturing systems and examines the most advanced computer-aided tools used in digital manufacturing. Computer Aided Design and Manufacturing consists of three parts. The first part on Computer Aided Design (CAD) offers the chapters on Geometric Modelling; Knowledge Based Engineering; Platforming Technology; Reverse Engineering; and Motion Simulation. The second part on Computer Aided Manufacturing (CAM) covers Group Technology and Cellular Manufacturing; Computer Aided Fixture Design; Computer Aided Manufacturing; Simulation of Manufacturing Processes; and Computer Aided Design of Tools, Dies and Molds (TDM). The final part includes the chapters on Digital Manufacturing; Additive Manufacturing; and Design for Sustainability. The book is also featured for being uniquely structured to classify and align engineering disciplines and computer aided technologies from the perspective of the design needs in whole product life cycles, utilizing a comprehensive Solidworks package (add-ins, toolbox, and library) to showcase the most critical functionalities of modern computer aided tools, and presenting real-world design projects and case studies so that readers can gain CAD and CAM problem-solving skills upon the CAD/CAM theory. Computer Aided Design and Manufacturing is an ideal textbook for undergraduate and graduate students in mechanical engineering, manufacturing engineering, and industrial engineering. It can also be used as a technical reference for researchers and engineers in mechanical and manufacturing engineering or computer-aided technologies.


Download Vehicle, Mechatronics and Information Technologies PDF

Vehicle, Mechatronics and Information Technologies

Author :
Publisher : Trans Tech Publications Ltd
Release Date :
ISBN 10 : 9783038262015
Pages : 5174 pages
Rating : 4.2/5 (62 downloads)

Download Vehicle, Mechatronics and Information Technologies PDF Full Free by X.D. Yu and published by Trans Tech Publications Ltd. This book was released on 2013-08-30 with total page 5174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2013 International Conference on Vehicle & Mechanical Engineering and Information Technology (VMEIT 2013), August 17-18, 2013, Zhengzhou, Henan, China. The 1094 papers are grouped as follows: Chapter 1: Design and Researches in Area of Vehicle and General Mechanical Engineering; Chapter 2: Mechatronics, Automation and Control; Chapter 3: Measurement and Instrumentation, Monitoring and Detection Technologies, Fault Diagnosis; Chapter 4: Computation Methods and Algorithms for Modeling, Simulation and Optimization, Data Mining and Data Processing; Chapter 5: Information Technologies, WEB and Networks Engineering, Information Security, Software Application and Development; Chapter 6: Power and Electric Systems, Electronics and Microelectronics, Embedded and Integrated Systems; Chapter 7: Communication, Signal and Image Processing, Data Acquisition, Identification and Recognition Technologies; Chapter 8: Information Technologies in Urban and Civil Engineering, Medicine and Biotechnology; Chapter 9: Material Science and Manufacturing Technology; Chapter 10: Information Technology in Management Engineering, Logistics, Economics, Finance, Assessment; Chapter 11: Related Themes.


Download The 11th IFToMM International Symposium on Science of Mechanisms and Machines PDF

The 11th IFToMM International Symposium on Science of Mechanisms and Machines

Author :
Publisher : Springer Science & Business Media
Release Date :
ISBN 10 : 9783319018454
Pages : 550 pages
Rating : 4.8/5 (184 downloads)

Download The 11th IFToMM International Symposium on Science of Mechanisms and Machines PDF Full Free by Ion Visa and published by Springer Science & Business Media. This book was released on 2013-10-18 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: The general topic of the symposium follows mechanisms development through all stages of conception, modeling, analysis, synthesis and control to advanced product design. This volume brings together the latest results in the field and celebrates a series of conferences that has been running for 40 years. The contributors and the editor are world leaders in their field.


Download Introduction to SolidWorks PDF

Introduction to SolidWorks

Author :
Publisher : CRC Press
Release Date :
ISBN 10 : 9781498731218
Pages : 1165 pages
Rating : 4.1/5 (312 downloads)

Download Introduction to SolidWorks PDF Full Free by Godfrey C. Onwubolu and published by CRC Press. This book was released on 2017-03-03 with total page 1165 pages. Available in PDF, EPUB and Kindle. Book excerpt: This senior undergraduate level textbook is written for Advanced Manufacturing, Additive Manufacturing, as well as CAD/CAM courses. Its goal is to assist students in colleges and universities, designers, engineers, and professionals interested in using SolidWorks as the design and 3D printing tool for emerging manufacturing technology for practical applications. This textbook will bring a new dimension to SolidWorks by introducing readers to the role of SolidWorks in the relatively new manufacturing paradigm shift, known as 3D-Printing which is based on Additive Manufacturing (AM) technology. This new textbook: Features modeling of complex parts and surfaces Provides a step-by-step tutorial type approach with pictures showing how to model using SolidWorks Offers a user-Friendly approach for the design of parts, assemblies, and drawings, motion-analysis, and FEA topics Includes clarification of connections between SolidWorks and 3D-Printing based on Additive Manufacturing Discusses a clear presentation of Additive Manufacturing for Designers using SolidWorks CAD software "Introduction to SolidWorks: A Comprehensive Guide with Applications in 3D Printing" is written using a hands-on approach which includes a significant number of pictorial descriptions of the steps that a student should follow to model parts, assemble parts, and produce drawings.


Download Assistive Robotics PDF

Assistive Robotics

Author :
Publisher : World Scientific
Release Date :
ISBN 10 : 9789814725255
Pages : 784 pages
Rating : 4.5/5 (252 downloads)

Download Assistive Robotics PDF Full Free by Hongye Su and published by World Scientific. This book was released on 2015-08-13 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides state-of-the-art scientific and engineering research findings and developments in the area of mobile robotics and associated support technologies around the theme of assistive robotics. The book contains peer reviewed articles presented at the CLAWAR 2015 conference. The book contains a comprehensive collection of papers on legged locomotion with numbers of legs from two upward to multi-legs, which includes robots cable of climbing walls, poles, or more complex structures such as continuing the distinctive CLAWAR themes. There are also a strong showing of articles covering human assist devices, notably exoskeletal and prosthetic devices, as well as social robots designed to meet the growing challenges of global ageing population. Contents: Plenary Presentations:Infrastructure Robotics: Opportunities and Challengesÿ(Gamini Dissanayake)Understanding Animal Locomotion Using Bio-Inspired Robotics and Soft Roboticsÿ(Tianmiao Wang)Assistive Robots:A Behavior Adaptation Method Based on Hierarchical POMDPsÿ(Y Tao, Y Chen, D Xu and J Zheng)Design and Control of Exoskeleton for Elderly Mobilityÿ(G Al Rezage, M O Tokhi and S K Ali)Assessing Human Robot Interaction: The Role of Long-Run Experimentsÿ(I Ferreira and J S Sequeira)Autonomous Robots:Wall Climbing Robot Motion Simulation in Non-Deterministic Area with Existing Moving Objectsÿ(V G Gradetsky, M M Knyazkov, A M Nunuparov, E A Semyonov and A N Sukhanov)Design and Implementation of a Scansorial Robotÿ(M A H Hassan and M O Tokhi)Biologically-Inspired Systems and Solutions:A Bio-Inspired Behavior Based Bipedal Locomotion Control ? B4LC Method for Bipedal Upslope Walkingÿ(J Zhao, Q Liu, S Schuetz and K Berns)Design and Implementation of a Smart Robotic Shark with Multi-Sensorsÿ(S Chen, J Yu, X Li and J Yuan)Control Algorithm for Walking Robot with Mosaic Bodyÿ(A V Panchenko, I A Orlov and V E Pavlovsky)Innovative Design of Clawar:A Novel Inspection Robot Moving on High-Voltage Power Transmission Lineÿ(T Guanghong and F Lijin)Rise-Rover: A Wall-Climbing Robot with High Reliability and Load-Carrying Capacityÿ(J Xiao, B Li, K Ushiroda and Q Song)Inspection and Innovative Sensing:An Innovative Torque Sensor Design for the Lightest Hydraulic Quadruped Robotÿ(H Khan, F Cannella, D Caldwell and C Semini)Mapping Repetitive Structural Tunnel Environments for a Biologically Inspired Climbing Robotÿ(G Paul, S Mao, L Liu and R Xiong)Locomotion:Application of Local Slopes in the Study of Metastable Walkingÿ(A T Safa, M Naraghi and A Alasty)A Mechanism of Particle Swarm Optimization on Motor Patterns in the B4LC Systemÿ(Q Liu, J Zhao, S Schuetz and K Berns)Dynamical Analysis of Large Deflection Compliant Leg During Terrestrial Locomotionÿ(T Fang, X Wang, Z Chen, M Xu and S Zhang)Manipulation, Intelligence and Learning for CLAWAR:Radiation Dosing Software Control of a Robot System for the Atlas Scanning Facilityÿ(H Marin-Reyes and R French)Acquisition Slope Surface Walking for Humanoids via Transfer Learningÿ(Y Wang, X Han, Z Liu, D Luo and X Wu)Medical and Rehabilitation Robotics:A Real-Time Gait Phase Detection Method for Prosthesis Controlÿ(J Li, X Zhou, C Li, W Li, H Zhang and H Gu)Powered Knee Orthosis for Performance of Assistance and Rehabilitation Purposesÿ(M Shysh, A Safonov, A Telesh and U Schmucker)Modelling and Simulation of CLAWAR:Wall Climbing Robot Motion with Adaptive Vacuum Contact Devicesÿ(V G Gradetsky, M M Knyazkov, A A Kryukova, E A Semyonov and A N Sukhanov)Combination of Affine Deformation and Dynamic Movement Primitive in Learning Human Motion for Redundant Manipulatorÿ(J Hu and R Xiong)Perception, Localization and Rescue Operations:Multi-Session Slam Over Low Dynamic Workspace Using RGBD Sensorÿ(Y Wang, R Xiong, S Huang and J Wu)Mechanism and Anti-Explosion Design of an Omnitread Serpentine Robot for Searching in Coal Minesÿ(G Liu, J Yan, C Li, Z Han, L Zhu, J Zhao and L Li)Planning and Control:Lidar-Based Navigation-Level Path Planning for Field-Capable Legged Robotsÿ(I Havoutis, D G Caldwell and C Semini)A Simple Modeling Method and Trajectory Planning for a Car-Like Climbing Robot Used to Strip Coating from the Outer Surface of Pipes Underwaterÿ(H Wang, C Yang, X Deng and J Fan)Underwater and Sea Robotics:Towards Deep-Sea Monitoring with SMIS ? Experimental Trials of Deep-Sea Acoustic Localizationÿ(S Neumann, D Oertel, H W”rn, M Kurowski, D Dewitz, J J Waniek, D Kaiser and R Mars)Mechanical Design of a Two-Joint Robotic Fishÿ(C Zhang, J Yu and M Tan)A Novel Hydraulic Mechanism for Bio-Inspired Undulating Robot: Modeling and Morphological Analysisÿ(H Xu, T Hu, X Zhang and L Zhang)and other papers Readership:ÿSystems and control engineers, electrical engineers, mechanical engineers in academic, research and industrial settings; engineers and practitioners in the public services sectors in health care, manufacturing, supply and delivery services.


Download Recent Advances in Mechanisms, Transmissions and Applications PDF

Recent Advances in Mechanisms, Transmissions and Applications

Author :
Publisher : Springer Nature
Release Date :
ISBN 10 : 9789811501425
Pages : 649 pages
Rating : 4.1/5 (14 downloads)

Download Recent Advances in Mechanisms, Transmissions and Applications PDF Full Free by Delun Wang and published by Springer Nature. This book was released on 2019-09-06 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gathering the proceedings of the conference MeTrApp 2019, this book covers topics such as mechanism and machinery design, parallel manipulators, robotics and mechatronics, control applications, mechanical transmissions, cam and gear mechanisms, and dynamics of machinery. MeTrApp 2019 provided researchers, scientists, industry experts, and graduate students from around the globe with a platform to share their cutting-edge work on mechanisms, transmissions, and their applications. The proceedings extend this platform to all researchers, scientists, industry experts, and students interested in these fields.


Download Innovation, Engineering and Entrepreneurship PDF

Innovation, Engineering and Entrepreneurship

Author :
Publisher : Springer
Release Date :
ISBN 10 : 9783319913346
Pages : 1171 pages
Rating : 4.3/5 (133 downloads)

Download Innovation, Engineering and Entrepreneurship PDF Full Free by José Machado and published by Springer. This book was released on 2018-06-02 with total page 1171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents endeavors to join synergies in order to create added value for society, using the latest scientific knowledge to boost technology transfer from academia to industry. It potentiates the foundations for the creation of knowledge- and entrepreneurial cooperation networks involving engineering, innovation, and entrepreneurship stakeholders. The Regional HELIX 2018 conference was organized at the University of Minho’s School of Engineering by the MEtRICs and Algoritmi Research Centers, and took place in Guimarães, Portugal, from June 27th to 29th, 2018. After a rigorous peer-review process, 160 were accepted for publication, covering a wide range of topics, including Control, Automation and Robotics; Mechatronics Design, Medical Devices and Wellbeing; Cyber-Physical Systems, IoT and Industry 4.0; Innovations in Industrial Context and Advanced Manufacturing; New Trends in Mechanical Systems Development; Advanced Materials and Innovative Applications; Waste to Energy and Sustainable Environment; Operational Research and Industrial Mathematics; Innovation and Collaborative Arrangements; Entrepreneurship and Internationalization; and Oriented Education for Innovation, Engineering and/or Entrepreneurship.


Download Electrical Engineering And Automation - Proceedings Of The International Conference On Electrical Engineering And Automation (Eea2016) PDF

Electrical Engineering And Automation - Proceedings Of The International Conference On Electrical Engineering And Automation (Eea2016)

Author :
Publisher : World Scientific
Release Date :
ISBN 10 : 9789813220379
Pages : 1140 pages
Rating : 4.0/5 (23 downloads)

Download Electrical Engineering And Automation - Proceedings Of The International Conference On Electrical Engineering And Automation (Eea2016) PDF Full Free by Zhang Xiaoxing and published by World Scientific. This book was released on 2017-04-12 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2016 International Conference on Electrical Engineering and Automation (EEA2016) was held in Hong Kong, China from June 24th–26th, 2016. EEA2016 has provided a platform for leading academic scientists, researchers, scholars and students around the world, to get together to compare notes, and share their results and findings, in areas of Electronics Engineering and Electrical Engineering, Materials and Mechanical Engineering, Control and Automation Modeling and Simulation, Testing and Imaging, Robotics, Actuating and Sensoring. The conference had received a total of 445 submissions. However, after peer review by the Technical Program Committee only 129 were selected to be included in this conference proceedings; based on their originality, ability to test ideas, and contribution to the understanding and advancement in Electronics and Electrical Engineering.


Download Computational Finite Element Methods in Nanotechnology PDF

Computational Finite Element Methods in Nanotechnology

Author :
Publisher : CRC Press
Release Date :
ISBN 10 : 9781351832595
Pages : 647 pages
Rating : 4.2/5 (325 downloads)

Download Computational Finite Element Methods in Nanotechnology PDF Full Free by Sarhan M. Musa and published by CRC Press. This book was released on 2017-12-19 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Finite Element Methods in Nanotechnology demonstrates the capabilities of finite element methods in nanotechnology for a range of fields. Bringing together contributions from researchers around the world, it covers key concepts as well as cutting-edge research and applications to inspire new developments and future interdisciplinary research. In particular, it emphasizes the importance of finite element methods (FEMs) for computational tools in the development of efficient nanoscale systems. The book explores a variety of topics, including: A novel FE-based thermo-electrical-mechanical-coupled model to study mechanical stress, temperature, and electric fields in nano- and microelectronics The integration of distributed element, lumped element, and system-level methods for the design, modeling, and simulation of nano- and micro-electromechanical systems (N/MEMS) Challenges in the simulation of nanorobotic systems and macro-dimensions The simulation of structures and processes such as dislocations, growth of epitaxial films, and precipitation Modeling of self-positioning nanostructures, nanocomposites, and carbon nanotubes and their composites Progress in using FEM to analyze the electric field formed in needleless electrospinning How molecular dynamic (MD) simulations can be integrated into the FEM Applications of finite element analysis in nanomaterials and systems used in medicine, dentistry, biotechnology, and other areas The book includes numerous examples and case studies, as well as recent applications of microscale and nanoscale modeling systems with FEMs using COMSOL Multiphysics® and MATLAB®. A one-stop reference for professionals, researchers, and students, this is also an accessible introduction to computational FEMs in nanotechnology for those new to the field.